Marine Fuel Density meter 

FG-K1-300-KW:                    

The Density meter can confirm the quantity of fuel delivered from the bunker barge, and provides CCAI (Calculated Carbon Aromaticity Index), Density in Vacuo, and Viscosity conversion.

Most oils can be measured at 50°C with an option at 70°C for very viscous fuels.

Calculation of Density is in kg/m3 @ 15°C in a vacuo.

 

Note: The Density meter is not suitable for use with any fuel with a low flash point temperature, and must not be used for heating any liquids other than diesel or residual fuel oils.

Specification :

Accuracy:  Typically within ± 0.1% (800-1010 kg/m³)

Calculations:  Density in kg/m³at 15°C in vacuo, centiPoise to centiStokes, CCAI - Calculated Carbon Aromaticity Index

Correlation:  ASTM D1298 IP160

Dimensions:  18 cm x 23 cm x 10 cm

Power:   110/240 VAC (auto selected)

Range:  800 to 1010 kg/m³ @ 15°C

Temperature:  50°C and 70°C

Test Time:  Heating from 15°C 10 mins, Repeat test maximum 30 seconds

Weight:  2.20 kg

 

......................................................................................................................

Ordering Information     

FG-K1-300-KW:                              Density Meter

Spare Hydrometers and consumables:

Product code               Range, Relative Density

AS-K3-014-KW           0.80 - 1.01 @ 15°C

AS-K3-015-KW           0.85 - 0.95 @ 15°C

AS-K3-016-KW           0.90 - 1.01 @ 15°

 

Key Features

  • Accurate as laboratory
  • Verify the correct grade and of fuel

Contact our expert

Martin Søvind Jensen

+45 2761 4502