DIGI Water in Oil test

Detection of the total free and dissolved water content in the oil samples, or in fuel oil which is even more important,  because a lot of problems occur when fuel oil is contaminated with water.

There are many probable sources of water contamination in lube oil in any system including: 

  •           Leakage from oil coolers.
  •           Condensation of atmospheric humidity.
  •           Diesel engine combustion spaces.
  •           Leakage at tank vents.
  •           Contamination from top-up oil 

The test cell can be used for both water in oil and BN depending upon the specification ordered.

It comes with either standard or  reagent.

Features :

  •  DIGI Electronic test cell with a guaranteed 5 year battery life.
  •  Ranges: 0-1%, 0-10%, 0-20%, 200-10000ppm (and additional BN if specified).
  •  Reagent system with comprehensive reagent packs for 50 tests.
  •  2 minute test time (standard reagents), 3 minute for    reagents.

Specifications :

Range:               0.02-1%, 200-1000 ppm, 0-10%, 0-20%
Range (LR):      0.02-1%, 100-3000 ppm, 0-10%
Test Time:        3 minutes
Memory:          Previous test
Battery Life:     Five years (5000 tests)


.........................................................................................................................

Ordering Information:

Part Number                                 Description

FG-K1-101-KW                            EasySHIP DIGI Water in Oil Kit

FG-K17032-KW                            DIGI Water in Oil Kit (Low Range)

FG-K17766-KW                            EasySHIP Electronic Oil Analysis Kit 0 - 1%

FG-K17767-KW                            EasySHIP Electronic Oil Analysis Kit 0 - 6000ppm

Key Features

  • Easy to use
  • Instant indication
  • Minimise off-hire and demurrage.

Contact our expert

Martin Søvind Jensen

+45 2761 4502