The Cold Corrosion Test Kit is a good way to accurately analyze the level of corrosive elements in cylinder oil, which can prevent serious damage. The kit gives a result within 5 minutes and you avoid sending the sample to a laboratory.
For sales or commercial inquiries please contact us at marine@insatech.com.
An easy to use, cost effective and fast way of determining the level of wear due to cold corrosion. By deriving the content of Fe2+ and Fe3+ in the scrape down oil, the impact of cold corrosion can be measured on board, and there by time consuming analysis in a land based lab can be eliminated, and the time from sample to necessary preventive action can be shortened drastically. The kit exceeds the normal cylinder oil test, as it gives a precise measurement of the Fe2+ and Fe3+ per million (PPM), by using a color matching test.
An accurate wear condition in the cylinder chamber can be observed when using this test kit with LinerSCAN or Ferrous Wear Meter. Then the corrective action can be taken at the appropriate time.
| Ordering Information | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product code | Item |
||||||||||||||||||
| FG-K19763-KW | Cold Corrosion Test Kit (CCTK) inkliding 1 Reagent Pack (100 tests) |
||||||||||||||||||
| FG-K19875-KW | Reagent pack for 100 tests |
||||||||||||||||||
| Technical Specifications | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measurement Range |
|
||||||||||||||||||
| Ambient Temperature | 20 - 55 °C |
||||||||||||||||||
If you are looking for some specific material, please write to us. Then we will try to find it for you, and send it as soon as possible.
Search
