Parker icount Oil Sampler (IOS)  

Accurate condition monitoring made quick, simple and cost effective.

The best solution to measure the quality of hydraulic oil and hydrocarbon fuel, in renewable energy, marine and offshore, mobile, military, aerospace and agriculture manufacturing.

Ability to take a sample from any part of the hydraulic system.

A system that is completely self-contained, because it has everything it needs (laser detection, memory, battery and pump) .

Features:

  •       Laser detection technology 
  •        High test data storage capacity up to 250,000 sets.
  •        Rugged casing
  •        Fast contamination detection
  •        Connecting the IOS is quick and reliable.
  •        Long life remote operation
  •       Easy to use
  •        Consistent with the latest standards.
  •       Adjusting flow rate automatically. 

 

Specifications:

Product start-up time:  10 seconds minimum

Measurement period:  Default 30 seconds run time; 15 seconds data logging time

Reporting interval:  On-board data storage every second. Output via RJ45 connection

Principle of operation:  Laser diode optical detection of actual particulates

International codes range: Up to ISO 22 (+/- 1 ISO code) NAS 0 - 12

Calibration:   Calibration by recognised on-line methods confirmed by the relevant ISO procedures. MTD - via a certified primary ISO 11171 automatic particle detector using ISO 11943 principles. Particle distribution reporting to ISO 4406:1999

Recalibration and Servicing:  Recommended every 12 months

Working pressure: 2.5 - 350 bar ( 35 - 5000 psi). Pressures above 2.5 bar require the use of a Parker Pressure Reducing Valve (PRV) - ACC6NN027

Working viscosity: 1 - 300 cSt

Flow range through IOS:  40 - 140 ml/minute; controlled at 60 ml/min by IOS's internal pump

Fluid connection interface:  INLET: 6 mm push-fit. DRAIN: 4mm push-fit

Ambient storage temperature for unit: -40°C to +80°C; -40°F to +176°F

Operating temperature for unit:  -30°C to +80°C; -22°F to +176°F

Operating humidity range:  5% RH to 100% RH

Fluid operating temperature (oil):   +5°C to +80°C; +41°F to +176°F

Fluid operating temperature (fuel):  -20°C to +70°C; -4°F to +158°F

Moisture sensor: Linear scale within the range 5% RH to 100% RH

Computer compatibility:  IP68-rated RJ45 connection that may be connected to a laptop computer's RJ45 LAN port using the 2 m cable supplied

Power requirement: Regulated power supply supplied with the unit

Certification: IP54 rating (unit open)

                      IP67 rating (unit closed)
                      EC Declaration of Conformity
                        Machinery Directive
                       EMC EN61000-6-3:2001
                       EMC EN61000-6-2:2001
                       EMC EN61010-1:2001
                           CE Certified

...................................................................................................................................

 Ordering Information

IOS1220UK                 IOS, Mineral MTD Online UK

IOS1210UK                 IOS, Mineral MTD Offline UK

IOS1221UK                 IOS Mineral Wireless Online UK

 

 Accessories:

 Product code                      Part

ACC6NN040              Power Supply (UK)

ACC6NN027              Pressure Reduction Valve ("PRV"), working pressure 2.5 - 350 bar

ACC6NN028              RJ45 Network Cable

ACC6NN029              Hose Accessory Bag

ACC6NN030             Carry Strap (Must be ordered together with IOS unit as attached during production)

ACC6NN031             Low Pressure Hose 1.5m

ACC6NN032             IOS Packing Box

ACC6NN033             IOS Blanking Plugs

ACC6NN034             High Pressure Hose - 1m

SER.MISC.067         Verification Fluid (2 x 500ml) - SIX MONTH SHELF LIFE

 

 

 

Key Features

  • Accurate Portable Condition Monitoring
  • Proven laser detection technology
  • High on-board test data storage capacity

Contact our expert

Martin Søvind Jensen

+45 2761 4502