Logo
Flomec Q9 1 Display 1024 Square

Q9 Display

The Q9 Display is the latest version of the Flomec computer displays. Features as low battery indication and the ability to display custom units with a name label has been incorporated as requested. Furthermore, you can also display velocity, rate and total in the Q9 display.

Optional plug-in daughterboards are simply added as original equipment or as a retrofit for:

  • 4-20mA
  • Scaled pulse
  • External power supply.

For sales or commercial inquiries please contact us at marine@insatech.com.

Contact us now

Easily Retrofitted, Battery Power Indication and Operator Consistency

The Q9 display has the following features that benefits you:

  • Highly Visible LCD characters against a yellow-tinted background
  • Many Field Configurable options for ease of operation including diagnostic mode and custom unit name
  • Easily retrofitted to most existing Flomec turbines
  • Maximum versatility with optional pre-configured plug-in daughterboards to supply 4-20mA and Scaled Pulse
  • Convenient Battery Power Level indication with automatic low battery warning
  • Safety first design with FM Class 1, Div 1; ATEX; IECex; cFM; CE approvals
  • Providing operator consistency for all your meters
  • Ultimate ease of operation with permanent preprogrammed 5-point factory calibration in Gallons
  • Accommodates a wide range of technical expertise with 3 Field calibration methods (K-Factor, Correction Factor or Dispense Display)
  • For simple Plug and Play installation, the Q9 is factory calibrated set to display Cumulative Total, ReSettable Batch Total, and Rate in Gallons per minute
  • All the daughterboard parameters are addressable through the two buttons on the Q9 display
  • Operates on two AAA batteries with approximately 2 years of operation
  • Maintains all of the same intrinsically safe approvals of past products.
G2 Series Flomec

Configurating it for you

The Q9 Display’s user configuration features:

  • PIN Protected, four-digit user selectable
  • 11 pre-programed engineering units and one user-configurable custom unit
  • Alphanumeric information line for on-screen instructions and custom unit name
  • Four pre-programmed, user-selectable time bases (Day, Hour, Min., Sec.)
  • Configurable screen update frequency
  • A user-selectable low-frequency filter
  • Field Calibration is retained when switched to Factory Cal so you can have two accessible calibrations available
  • Three field calibration methods available (1 point Dispense Display, 5-point Correction Factor, 5 point K-Factor)
  • Diagnostic mode shows % battery life remaining.

Get more information here

Flomec Q9 1 Display 1024X16x9

Additional Electronic Choices

The Q9 Displays offers you additional electronic options to choose between:

Pulse Output Module installed between the local display and the meter body, that offers:

  • A Scaled NPN Open Collector Pulse
  • External Power to the local display
  • 10 ft. of installed cable

4-20 mA Module installed between the local display and the meter body, that provides:

  • A 4–20 mA signal
  • A Scaled NPN Open Collector Pulse
  • External Power to the local display
  • 10 ft. of installed cable

Pulse Output Module installed in place of the display (blind meter), that provides:

  • An Unscaled NPN Open Collector Pulse

Replacement Q9 Computer Display for a meter body that has an old 09 display (See Note 1), that offers:

  • Extra parts required to retrofit a Q9 display in place of a 09 display.

 

Note 1: FM/ATEX Approved when replacing a FM/ATEX Approved 09 display on a FM/ATEX Approved A1 or G2 meter.

Insatech Medarbejdere Website MSR
For technical questions

Martin Søvind Jensen

Tel: +45 2761 4502

Email: Martin.Sovind@insatech.com

Write to Martin

Insatech Medarbejdere Website ASMI
For commercial inquiries

Astrid Mihut

Tel.: +45 5537 2095

Email: Marine@insatech.com

 

Contact us now

Specifications
Standard Factory Configuration
  • 2 Totals (1 Resettable, 1 Cumulative)
  • Factory Calibration in gallons or litres
  • User Calibration and Rate of Flow Indication
Display Electronics

Q9 Electronics can be used on G2, TM, A1, and QSE Series Meters
Totalizing Registers

Cumulative and Batch
K-Factor Limits
  • Min: 0.001 pulses/unit
  • Max: 999,999 pulses/unit
Field Calibration

Field calibrate by user methods:

  • K-factor entry
  • Correction Factor (% Adjust)
  • Dispense Display
Readout Totals

LCD with floating decimal: Minimum Display = 0.001 units; Maximum Display = 999,999 x 100 units (6 digits)
Input Pulse Rate

Frequency Range is 0.25 Hz - 3 kHz
Turbine Display

Internal Power Supply:

  • 2 Alkaline AAA batteries at 1.5 volts each

Alkaline Battery Life:

  • Typically 2 Years
Temperatures

Operating Temperature (FM/ATEX Approved Meters):

  • 0° F to +129° F (-18° C to +54° C)

Operating Temperature (Non-Approved Meters):

  • 0° F to +140° F (-18° C to +60° C)

Storage Temperature: 

  • -40° F to +158° F (-40° C to +70° C)

Downloads

  • Data Sheet - Q9 Display - Flomec
    English | pdf
  • Owners Manual - Q9 Display - Agency-Approved - Flomec
    English | pdf
  • Owners Manual - Q9 Display - Non-Agency Approved - Flomec
    English | pdf
  • Owners Manual - Q9 Display - FM-Agency-Approved - Flomec
    English | pdf
  • Article - Q9 Display - Flomec
    English | pdf

Didn't you find what you were looking for? 

If you are looking for some specific material, please write to us. Then we will try to find it for you, and send it as soon as possible.

Fill out the contact form 

Consent for storing of submitted data *


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

To top

Search