Rent Flexim
Clamp-on
Flowmeter

Rent a Flexim Clamp-on flowmeter with us

You can measure the flow of liquid, as well as thermal energy, without cutting or welding into the pipe with the portable ultrasonic flow meter from Flexim.

The transducers are easily mounted outside the pipe with small chains or with a strap for more long-term installations.

The advantages the clamp-on flowmeter gives you:

Non-invasive flow monitoring
Easily installed clamp-on sensors with no interruption of flow
Wide range of pipe materials and sizes from 10 to 3400 mm
Can log up to 100.000 measurements
Integrated wall thickness measurement
Integrated energy kit.

For sales or commercial inquiries please contact us at marine@insatech.com

Book a rental

Two-channel clamp-on flowmeter

The energy set consists of:

Q and M-transducers, which makes it possible for you to measure the diameter of the pipe from approximately 10 to 3400 mm. It also includes the gauge to measure the wall thickness of the pipe, mounting fittings, clamp-on temperature sensors, and software.
A special energy version makes it possible to measure the usage of energy e.g., the deposed energy in the heat exchanger, the condenser, and so forth.
The flowmeter can log up to 100.000 measurement values, which can be transferred to an Excel datasheet because of the software.
Easy to mount transducers with either small chains or a strap for more long-term installations.
A practical and solid case with room for the transducers and other accessories, which makes it easy to transport the flowmeter.

Rental Conditions

The equipment will be checked for errors and omissions before it is delivered to you, and it will be checked again upon the end of the rental period. The equipment is delivered in transport packaging and has to be returned in this as well unless you make other agreements with us.

As a renter, you have the insurance responsibility for the equipment during the rental period. This means that you are liable for any damage to the equipment or in the event of theft.

If the equipment is damaged at the return, we will evaluate if it is possible to repair the equipment in our service workshop or if it has to be sent for reparation at the supplier. We will notify you immediately and let you know if there are any extra costs.

If the rented period agreed upon is exceeded without any prior agreement a reminder fee of 500 DKK will be invoiced, plus the costs for the additional rental period.

The following applications are available as options for set-up

Flow Measurement and Ballast Water Treatment Systems
Wastewater Treatment Flow Measurement
Bunkering Verification and Check Metering
Engine Fuel Consumption & Cooling Circuits Flow Monitoring
Flow and Thermal Energy Measurement at Refrigeration Plants
Reverse Osmosis – Seawater Flow Measurement
Temporary Flow Measurement for Meter Verification, Lead Detection, and General Inspection Tasks.