Stanhope Seta C-92 Automatic Cleveland Flash Point Tester - 35300-0

Operation
Test methods	ASTM D92; D8254; IP 36; ISO 2592; DIN 51 376; NF T60-118; JIS K 2265-4; AASHTO T48
Test modes	Expected flash point, fire point and search mode
Ignition system	High purity platinum electric hot-wire or gas flame; automated gas flame relight; automatic electric ignitor failure detection
Flash detection	Ionisation ring
Fire detection	Ionisation ring and optical fire sensor
Cooling	Fast forced air (integral fan, adjustable)
Heating rate	Adjustable fast heating mode (up to 17 °C/min) and standard rate 5.50 °C/min
Calibration	Calibration and verification dates/data stored, easy retrieval and password protected
Application range	Ambient to 400 °C
Draught shield	Included, draughts protected on 3 sides, front and side move down for easy access

Measurement
Sample temperature probe	Class A PT 100 stainless steel probe, 0.1 °C resolution, -50 °C to +450 °C Resistance calibration with unlimited data points (more than 5 is recommended)
Units of temperature	°C or °F (user selectable)
Barometric pressure	Automatic flash point correction with built-in pressure sensor, kPa (incudes alternative units such as hPa, mbar, mmHg)

Measurement

Sample temperature probe

Class A PT 100 stainless steel probe, 0.1 °C resolution, -50 °C to +450 °C

Resistance calibration with unlimited data points (more than 5 is recommended)

Units of temperature

°C or °F (user selectable)

Barometric pressure

Automatic flash point correction with built-in pressure sensor, kPa (incudes alternative units such as hPa, mbar, mmHg)

Data Management
Information	Real-time display on screen of test progress and results, results securely stored in a SQL database
Internal memory	More than 7 Gb of storage
Statistical quality control (SQC)	Built in SQC module according to ASTM D6299 to analyse SQC samples

Safety
Fire extinguisher	Snuffer plate is automatically deployed at the end of test to extinguish fires in sample cup Optical sensor deploys inert gas* around cup and cup area if persistent fire is detected *requires a supply of inert gas (N2, Argon etc.) at 140 kPa to 160 kPa Manual fire extinguisher deployment switch is available as an option, and can be mounted at a discrete distance, outside the fume cupboard to enable a user to deploy the fire extinguisher manually if required
Over temperature cutout safety device	>400 °C

Safety

Fire extinguisher

Snuffer plate is automatically deployed at the end of test to extinguish fires in sample cup

Optical sensor deploys inert gas* around cup and cup area if persistent fire is detected
*requires a supply of inert gas (N2, Argon etc.) at 140 kPa to 160 kPa

Manual fire extinguisher deployment switch is available as an option, and can be mounted at a discrete distance, outside the fume cupboard to enable a user to deploy the fire extinguisher manually if required

Over temperature cutout safety device

>400 °C

Gas Supply (optional)
Gas type	Butane, propane or natural gas source
Gas supply	30mbar (3kPa)

Power Requirements
Power	100 V to 240 V, 47 Hz to 63 Hz, autosensing. Maximum 600 W, during typical test <100 W

Power Requirements

Power

100 V to 240 V, 47 Hz to 63 Hz, autosensing.

Maximum 600 W, during typical test <100 W

Interface Specifications
Display	Large 18 cm (7 inch) LCD colour touchscreen, 1024 x 768 pixels
Data input/output	Connection to LIMS via Ethernet RJ45, USB Type A (Qty 2), test results can be exported to memory stick in various formats (PDF or CSV) or transferred via QR code
Printer options	USB, Ethernet or RS232C
Language	User selectable - English (default)

Environmental conditions
Operating temperature	5 to 35 °C (50 to 104 °F)
Relative humidity	Up to 80% at 35 °C (not condensing)
Altitude	2000m maximum

Physical
Dimensions (HxWxD)	240 x 385 x 450 mm
Weight	15.5 kg