Carraro - Control valve MAXOMATIC
This valve type MAXOMATIC is characterized by the fact that there are no mechanical moving parts or sliding guides, thereby ensuring an extended service life and a unique reliability. Installation is possible in any position. Easy maintenance as the diaphragm can be changed without removing the valve from the process line. Open and close speeds can be controlled to prevent dangerous water strokes.
The special inner shape ensures:
-
Very low pressure loss
-
Regular and turbulence-free hydraulic flow
-
Low risk of clogging due to impure media
Optimal closing performance is achieved between the elastic membrane surface (elastomer with nylon reinforcement) and the machined metal seat. The valve seat design provides a tight seal and minimizes wear on the seat in case of solid particles in the media
Function: Reduction / relief / flow limitation / level regulation
Sizes: From 1/2 "to 16"
Connection: Thread (F-NPT or GAS / BS
Flange (ANSI or PN)
Seat: Single
Max pressure step: ANSI 300, PN 16-25
CV: From 75 to 1460
Material valve body: Winches, steel, stainless steel and other "exotic" materials
Material membrane: NR, NBR, FKM
Max inlet pressure: 20 bar
Pressure control range: 0.5 to 16 barg
Min. temperature: -25 ° C
Max. temperature: 150 ° C
Pilot circuit: Copper, stainless steel and other "exotic" materials