On-Line ATEX Metallic Wear Debris Sensor
NEW - Fully compliant with ASTM D7917-14
A world first, ATEX Zone 1 & 2 Approved Metallic Wear Debris Monitoring.
Oil analysis service should include Spectrometeric Analysis and ferrous density (PQ) results, indicating changes in the wear pattern, since an early warning of changes in the particle and wear debris levels will help to prevent all types of failure.
Key Features
- Easily integrated into existing condition monitoring and operating control systems with both digital and analogue outputs
- Closed well IP67 appropriate for industrial applications
- Solid metal cabinet provides strength and magnetic shielding
- A big range of interface options
- Fully compatible with ASTM D7917 -14
Typical Applications:
- Wind Turbines
- Mud Pumps
- Large Gearboxes Bearings
Specifications
Detection Range: >40 micron (0.04mm) [0.00157 inch] Ferrous Metal, >135 micron (0.135 mm) [0.00531 inch] Non-Ferrous Metallic. Simultaneous quantification of metallic composition, size category and particle count.
Fluid Compatibility: Petroleum, synthetic oils and water/oil emulsions.
Fluid Environment: <20 Bar (290 psi) @ -40 to 90°C (-40 to 194°F), 0.28 m/s (1.3 Litres/minute) to 1.9 m/s (9 Litres/minute), <500cSt @ 40°C
Connections: 1/2" NPT x 17 mm deep Female threads, 10 mm ID x 120 mm L bore
Ambient OperatingTemperature: -40°C to 65°C.
Communications: 1 x Alarm contacts (0.1 A max), RS485 Modbus RTU (over RS485), Modbus over TCP/IP 10 Base-T Ethernet, CANopen.
Inputs: 20 to 28 Volts DC
Options: Cable length by special request, Power supply, Stand alone display unit, Cable termination options by special request.
Protection: IP66
ATEX Marking: II 2 G, Ex mb IIB T5, Ta = -40ºC to + 65ºC
IECEx Marking: Ex mb IIB T5, -40ºC < Ta < 65ºC Gb
Ordering Information:
Part Number Description
FG-K19400-EX EX WEAR DEBRIS SENSOR Ex mb llB T5, -40°C < Ta < 65°C Gb
Key Features
- Hazardous Area Certified
- Real time indication of condition
- Most Sensitive MWDS
- Instant indication