Logo
FGL01364 Horn 1024 Square

Speed Phase Sensor FGL01364

This FGL 01364 from HORN is an inductive phase sensor with amplifier, which is ideal for sensing objects such as:

  • Gear wheels
  • Punched discs
  • Integral steel shafts.

It features a coil with an oscillator circuit and amplifier. By adjusting the air gap between the object and sensor tip, voltage changes in the coil/oscillator system are detected and evaluated.

For sales or commercial inquiries please contact us at marine@insatech.com.

Contact us now

Other available Inductive Pulse and Speed Sensors

Below we have gathered the HORN selection of pulse and speed sensors. If there is a specific kind you need, which is not found here, please do not hesitate contacting us here.

FGL01406 Horn 1024 16X9

The Inductive Pulse Sensor with Amplifier: FGL 01406

The measurement principle and framework conditions for the FGL 1/... pick-ups apply to the FGL01406-.. sensor as well. However, the FGL01406-.. sensor offers a square wave signal output (PNP), ensuring safety against incorrect polarity and short circuits.

With their robust design, these pick-ups are ideal for applications in combustion engines and high-vibration machinery. They have obtained approvals from recognized classification societies.

Read more about the speed sensor FGL 01406 here

Speed sensor FGL 01620

The speed sensor FGL 01620 from HORN can be used both at extremely low speed, and almost full stop can be detected, and it is also applicable for highspeed rotations up to 20kHz frequency. It is a preferred sensor for offshore and marine purposes because of its vigorous stainless-steel design.

The FGL 01630 has the following benefits for you:

Wide speed sensing range

  • Robust design
  • Contactless, thus, wear-free
  • Large air gap viable
  • Multifunctional sensing options.

Read more about the speed sensor FGL 01620 here

FGL01406 1 HORN 1024 16X9
FGL1 16 Speed Sensor HORN 1024 16X9

Turbocharger speed sensor FGL 1/16

The speed sensor FGL 1/16 from Horn is composed of a metallic housing that contains the sensor components and, in some cases, the electronic components. This design ensures mechanical durability and prevents interference from external circuits.

To achieve a high signal-to-noise ratio the sensor uses different parts, where each measurement task requires a distinct measurement principle, including:

  • Compatible output levels
    Shielded cables
    Plug connectors.

Read more about the speed sensor FGL 01620 here

Insatech Medarbejdere Website MSR
For technical questions

Martin Søvind Jensen


Tel: +45 2761 4502

Email: Martin.Sovind@insatech.com

Write to Martin

Insatech Medarbejdere Website ASMI
For commercial inquiries

Astrid Mihut


Tel.: +45 5537 2095

Email: Marine@insatech.com

 

Contact us now

Technical Specifications for TGL014xxx
Supply voltage

+10...32 VDC

<+10 VDC undefined work

>+32 VDC destroyed

Output current max.

180 mA

Output Signal

PNP

Polarity protection

yes

Short Circuit Protection

Yes

Function

N.O.

Mounting

Flush

Mounting distance to gear:

Depends on module frequency range: 0 Hz...1 kHz

Operating temperature

-25°C...+85°C

Operating temperature max.

-25°C...+100°C

Storage temperature

-41°C...+90°C

Cable gland insert

TPE-V

Housing

1.4305 (AISI 303)

  • Data Sheet - FGL01364 - HORN
    English | pdf

Didn't you find what you were looking for? 

If you are looking for some specific material, please write to us. Then we will try to find it for you, and send it as soon as possible.

Fill out the contact form 

Consent for storing of submitted data *


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

To top

Search