Fuel and Lube Test Kits use chemical reagents to test the oil. As you use the test kits these will, thus, be consumed and need replacement.

A small portable magnetometric device with a LCD screen, for analysis of oil samples and detecting metal particles. Easy to use on board results in 2 seconds.

The Cold Corrosion Test Kit is a good way to accurately analyze the level of corrosive elements in cylinder oil, which can prevent serious damage. The kit gives a result within 5 minutes and you avoid sending the sample to a laboratory.

Economical solution kit. Allows the user to get an accurate picture of the iron level in the cylinder oil, in minutes, by using a color matching test.

A sensor with magnetometry combined using smart algorithm to detect a particle size, speciation, distribution and count with an unbeatable detection range.

Monitor fuel dilution, soot ingress and contamination of oils and fluids using one online sensor — the only one of its type to measure nS/m conductivity.

LinerSCAN monitors effectively, in real-time, heavily polluted and viscous flow of drain oil, and optimizes the lubricant feed rate on board before the problem occurs

A small self-contained case to analysis the hydraulic system and detect the contamination by metallic and non-metallic contaminants.

The last generation in ANALEX pq laboratory equipment range. Designed for use instead of pqM and pqA instruments, and with increased accuracy and range reproducibility at low level.

A magnetic and centrifugal separation instrument offers a quick and simple method of wear debris separation and particle size analysis. Preparation time per sample is about 20 minutes and 10 min for analysis time by photometric method and 6 min by gravity method.

Early alert for bearing and gear wear debris at the earliest stage, also in hazardous areas. A world first, ATEX Zone 1 & 2 Approved Metallic Wear Debris Monitoring.

An early warning system for water in oil status which can reduce the risk of bearings becoming damaged. This highly accurate sensor monitors the oil continuously, measuring the oils Relative Humidity (%RH) and Temperature values (T).