Knowing exactly how much media is present in a tank or how much product is in a cargo hold is essential for running a ship. The measurement is usually performed by a level instrument using methods such as radar, ultrasonic, electrical capacity, floaters (relays) or pressure. A level measurement can be used in many applications e.g. automating the loading and transfer of cargo, ballast water and fuel to their respective tanks as well as ensure the stability of the vessel via level based trim monitoring.
116RESULTATERNULSTIL
Radar - Bulk solids
VEGAPULS 67 Level measurement
Level measurement in solids and powders where ultrasonic meters were previously used. Measuring range up to 15 m.
Radar - Bulk solids
VEGAPULS 68 Level measurement
Level measurement in solid / powder under difficult conditions in large product tanks. Measuring range up to 70 m and process temperature between -200 ... + 450 ° C
Radar - Bulk solids
VEGAPULS SR 68 Level measurement
(SR: Short Range) Level measurement in solid / powder under difficult conditions. Measuring range up to 30 m and process temperature between -200 ... + 250 ° C
Radar - Bulk solids
VEGAPULS 69 Level measurement
Level measurement in solid / powder under different process conditions. High frequency radar with good focusing ability. Measuring range up to 120 m and process temperature between -40 ... + 200 ° C
Radar - Level indication
VEGAMIP 61
Radar based level indicator. Whether measured in solids or liquids, VEGAMIP 61 certainly detects the level, even under extreme process conditions.
Radar - Bulk solids & liquids
VEGAPULS 6X level measurement
With VEGAPULS 6X you get a sensor that can handle any application, no matter if the medium is liquid, solid, hot, cold, hazardous or corrosive. You no longer need to select the right instrument from a multitude of different options. You just specify the operational parameters and process conditions and you will get an instrument that is tailor-made for you.
Radar - Bulk solids & liquids
VEGAPULS 11 level measurement
VEGAPULS 11 is the ideal sensor for non-contact level measurement of liquids and bulk solids in simple applications.
Radar - Bulk solids & liquids
VEGAPULS Air 42 level measurement
VEGAPULS Air 42 is the ideal sensor for all autarkic applications with bulk solids and liquids.
No results found
Level
The Basics of Level Measurement
Level measurement is basicly measuring the quantity of a product within a vessel/tank. This could be either a soild or liquid substance like oil, chemicals or coal. The level measurement device is usually placed on the top of the vessel or the bottom/side depending on the measuring princible.
When doing a continuous level measurement a level transmitter detects the level of a medium in a tank and converts it into an electrical signal. The level signal can be displayed locally or incorporated into an on board management system.
A point level detection is a level transmitter which detects when a certain predefined level is reached. A switching command starts or stops filling equipment or similar from the sensor signal.
We offer level sensors across all the different measuring principels which includes:
- Radar
- Guided Wave Radar
- Ultrasonic
- Capacitive
- Hydrostatic
- Radiation-based
- Vibration
Guidance to Choosing the Correct Level Sensor
We have been supplying level sensors of almost all types for decades, and we know which type of instrument would be most appropriate for your application, based on your requirements to accuracy, conditions where it should be used and what your end-purpose with the sensor is. We will gladly assist you in choosing the correct instrument with the desired characteristics and features, and we aim to provide a satisfactory solution to your needs the first time. Regardless if your focus on accuracy, special ambient conditions, ease of installation or price. As we have all supporting functions in-house, we can even help you with installation, maintenance, repair or up-stream signals integration.
Back to product overview