The ShaftTRQ is a continuous shaft power measurement system that is easy and flexible to install and simple to operate.
For sales or commercial inquiries please contact us at firstname.lastname@example.org.
That ShaftTRQ consists of two magnetic sensor belts and a terminal box with a screen. The touch screen display is intuitive to use and can display KPI’s such as: Torque [kNm], RPM, shaft power [kW] and live load diagram. Additionally, it can automatically generate reports (daily or sea trial).
The design allows for easy installation and is done by strapping the two magnetic belts to the propeller shaft placing them 1,5 m to 2 m apart. We recommend installing the system with an intermediate shaft bearing in between and use the bearing socket for installation. The ShaftTRQ can be installed even if the sensor belts are installed on variable shaft diameters. If you have less than the required 1,5 m of space, a special solution can be made on request.
ShaftTRQ comes with a comprehensive preparation and installation manual with pictures which makes it easy for your crew to perform the installation. Furthermore, zero calibration can also be performed by your crew.
100 / 240 VAC, 50-60 Hz, 16A
250...1000 mm (<250 mm on request)
Up to 250 RPM (>250 RPM on request)
|Torque / RPM measurement||
High-resolution sensor, contact free
Mini SD card
Engine overload, system error (pot. Free contacts)
Repeater display for ECR or bridge installation
If you are looking for some specific material, please write to us. Then we will try to find it for you, and send it as soon as possible.