Products

The Cold Corrosion Test Kit is a good way to accurately analyze the level of corrosive elements in cylinder oil, which can prevent serious damage. The kit gives a result within 5 minutes and you avoid sending the sample to a laboratory.

Economical solution kit. Allows the user to get an accurate picture of the iron level in the cylinder oil, in minutes, by using a color matching test.

A sensor with magnetometry combined using smart algorithm to detect a particle size, speciation, distribution and count with an unbeatable detection range.

Monitor fuel dilution, soot ingress and contamination of oils and fluids using one online sensor — the only one of its type to measure nS/m conductivity.

LinerSCAN monitors effectively, in real-time, heavily polluted and viscous flow of drain oil, and optimizes the lubricant feed rate on board before the problem occurs

A small self-contained case to analysis the hydraulic system and detect the contamination by metallic and non-metallic contaminants.

The ANALEX pqL is a portable ferrous debris analyzer for lube oil, providing instant wear particle analysis to optimize maintenance and prevent breakdowns.

A magnetic and centrifugal separation instrument offers a quick and simple method of wear debris separation and particle size analysis. Preparation time per sample is about 20 minutes and 10 min for analysis time by photometric method and 6 min by gravity method.

Early alert for bearing and gear wear debris at the earliest stage, also in hazardous areas. A world first, ATEX Zone 1 & 2 Approved Metallic Wear Debris Monitoring.