Products

Binsfeld Engineering’s Sea Trial Kit provides everything you need to measure shaft torque, speed, and power on your vessel during sea trials. The all-in-one system measures and records data for up to 2 shafts simultaneously, at a rate of up to 2400 Hz for torsional vibration testing. The components come in an easily transportable, robust, and compact case, allowing for easy set-up and transport of the system between jobs.

The Binsfeld Engineering TorqueTrak 10K is a non-contact telemetry system ideal for real-time measurement of torque. The system is ideal for short-term data collection and diagnostic testing. It is designed to operate in harsh field conditions and is suitable for a wide range of applications, including marine propulsion systems, industrial machinery, and wind turbines.

The Binsfeld TorqueTrak SPM-iON is a cutting-edge strain gage solution that accurately measures torque, RPM, and power on rotating shafts without requiring shaft disassembly or alteration. With only two main components and no need for a base mount, installation is simple and lead times are quick thanks to the innovative chain link design.

Brannstrom BilgMon 488 is a bilge water oil content monitor designed for marine applications. It is used to ensure compliance with IMO MEPC.107(49) regulations by continuously measuring the oil content in bilge water before discharge overboard.

The SILSTER 168 automatically sterilizes the water of the fresh water holding tank with no need for crew interaction and practically no maintenance need. Also bunkered water can be sterilized without manual setting of current and time.

The Oil Discharge Monitoring System from Brannstrom, CleanTrack 1000 B, has been designed to provide means of monitoring, recording and controlling the ballast discharge in accordance with the requirements in Resolution MEPC.108(49) as amended by Resolution MEPC.240(65) and is also approved for Bio- fuel blends in accordance with MEPC.1/Circ.761 as revised.

The GreenMon is a different instrument from the regular 15 ppm monitor. The instrument is mainly used for dirty water applications where the optical measuring principle of the regular 15 ppm instrument cannot be used.

This tamper proof system controls and monitors the oil content of the bilge water discharge, ensuring compliance with MARPOL 73/78, i.e. making sure the vessel does not exceed legal overboard discharge limits. This unit is required for vessels above 10,000 gross tons when operating in certain areas.

The flow switch from Brannstrom for the BilgMon 488 15 PPM alarm help you ensure operational safety and compliance. The flow switch is designed to monitor sample flow and prevent accidental pollution.